FLT Series Cartridge filters
3 Sizes - PVC or Corzan® CPVC
Designed for the most demanding applications these all plastic cartridge filters are used to filter fine particles from the process fluid. Models are available to accommodate 10”, 20” and 30” wound or pleated polypropylene filter cartridges in either PVC or CPVC construction. Both come standard with a FPM seal. The filters are designed so that compression seals the filter unit eliminating the need for a center rod. An integral plug on the hand removable filter cover makes for easy bleeding of the unit. The filters feature a 3/4” NPT (female) inlet connection to eliminate the chance for broken NPT (male) connections. An optional mounting base is available for mounting the filter to the floor or work surface.
All wound cartridges have a 1” I.D. and 2-1/2” O.D. The pleated cartridges have a 1” I.D. and 2-5/8” O.D. Maximum flow rates for both are 5 GPM per 10” of filter cartridge length. Cartridges are sold separately.
- All Plastic Construction Will Never Rust or Corrode.
- Hand-Removable Cover.
- No Metal in Contact with Fluid Being Pumped.
- Choice of CPVC or PVC Construction.
- FPM O-Ring Cover Seal.
- Choice of Pleated or Wound PPL Filter Cartridges.
- Integral, Plugged Tap On Cover for
- Easy Bleeding of the Filter.
For 1 to 100 micron filtration in the following industries:
- Photo Processing
- Pollution Control
- Chemical Processing
- Water Treatment